• Single Phase Overcurrent Protection with Definite Time Trip Delay
• Two individually settable overcurrent relays
• For use with 1A or 5A current transformers
• Up to two individual very fast analogue output signals (<50mS), (optiona)
• DIN96 Slave Indicator with full current scale (optional)

Description
KCC101x series provides current overload protection of single phase generators ormotors.

True RMS measurement not affected by heavily distorted waveforms provides highest up precision (1.0%) protection. Less than 50mS overcurrent detection.

User settable trip levels and delays. Colour of LEDs indicates alarm status. LEDs flash during count-down.

Relay Configurations
R1 energises when trip level one (Overcurrent 1) is exceeded and R2 trips when trip level two (Overcurrent 2) is exceeded. R3 is an extra status relay that energises if either alarm relay 1 or 2 is active and can be used for local indication, PMS input, alarm system input etc.

OUTPUTS
Up to two individual very fast analogue output signals (optional) proportional to a range. The analogue output is isolated from the CT and auxiliary power.

Models
KCC101E
KCC101FA  
KCC101FB
KCC101G
KCC101GFA
KCC101GFB