Digital Panel Meters AC & DC - Panel Instruments - Electronic Control and Instrumentation

Digital Panel Meters AC & DC

DGU DIGITAL PANEL METER - AC VOLTAGE & CURRENT MODELSAC MODELS

TE Connectivity’s (TE) Crompton Instruments DGU Digital Panel Meters have been designed for industrial applications, where precise measurement of the on-site Current and Voltage is necessary. The meter can be used in a variety of aplications including industrial automation and for laboratory uses.

The DGU Digital Panel Meter has a class accuracy of 0.5 and measures Voltage or Current in 3 phase 4 Wire, 3 phase 3 Wire and single phase networks replacing the need for multiple analogue panel meters.

Using two function keys it is possible to display various parameters in Current and Voltage DPM. These function keys are also used for Network selection, CT/PT Primary values and CT/PT Secondary values. The user can easily set the display in auto scrolling mode or fixed screen mode using front panel keys.

In case of power failure, the instrument memorizes the last screen stored. For every 1 min. the instrument stores the screen no. in the non-volatile memory.

The DGU Digital Panel Meter conforms to IP54 (for front face) & IP20 (for back). The 96x96mm instrument has very low back depth (behind the panel) of less than 40mm.

KEY FEATURES
• Fast & Easy Installation
• True RMS measurements
• Programmable CT/PT Primary
• Programmable CT/PT Secondary
• Single phase, 3ph3wire or 3ph4wire Network
• Two auxillary power options
• 4 Digits ultra bright LED display
• Incase of power failure last screen is stored
• Digit height 14mm
• IP54 Front (with gasket)
• IP65 for front with optional kit (96X96mm only)

APPROVALS
• IEC 61326-1: 2005
• IEC 61010-1-2001
• CE
• UKCA

DGU DIGITAL PANEL METER - DC VOLTAGE & CURRENT MODELSDC MODELS

TE Connectivity’s (TE) Crompton Instruments DGU Digital Panel Meters have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.. The meter can be used in a variety of aplications including Distribution and Control Panels, electrical load monitoring, industrial automation and for laboratory uses.

The DGU Digital Panel Meter has a class accuracy of 0.5 and measures DC Voltage or Current. The meter has a wide range of inputs to facilitate either a direct connection, or secondary inputs from devices such as DC Shunts & Transducers.

The meter is completely programmable and user can easily scale the values as per the requirements onsite. Setting for ‘-ve’ sign and decimal point position is also provided.

In case of power failure, the instrument memorizes the last screen stored. For every 1 min. the instrument stores the screen no. in the non-volatile memory.

The DGU Digital Panel Meter conforms to IP54 (for front face) & IP20 (for back). The 96x96mm instrument has very low back depth (behind the panel) of less than 40mm.

The meter supports bent characteristics to enable the user to configure the meter as per requirement.

The meter can be configured to display power factor and gives an accurate indication of the ambient temperature in °C and °F.

KEY FEATURES
• Fast & Easy Installation
• Low Back Depth (96x96 model)
• Function Keys for easy programming
• Two auxillary power options
• 4 Digits ultra bright LED display
• Incase of power failure last screen is stored
• IP54 for front face (with gasket)
• IP65 for front with optional kit (96X96mm only)
• Available in 96x96mm or 96x48mm
• Wide range of voltages & currents

APPROVALS
• IEC 61326-1: 2005
• IEC 61010-1-2001
• CE
• UKCA