• 1-phase current simulator for testing of generator guards and protection units
  
• LED display for easy reading of current measurment
  
• For testing of current, current  differential, overcurrent and short circuit, active (kW) and reactive (VAr) power, etc.
• The current output is galvanically isolated from the mains supply
• Built into a solid Pelicase suitcase with handle for easy carriage and safe transport handling
• Storage space for working tools, wires, etc.

The maximum current to be drawn from output largely depends on the ohmic resistance of the external current loop. The current terminals are rated 20A, and 4mm plugs may be flipped into the center of the terminal. Use large size wires for high current levels to reduce ohmic losses. (recommended wire is minimum 2.5mm²).

The current outputs are individually adjustable 0-3A or 0-15A. (selectable on selector switch) Be sure to connect the input voltage to the correct input terminals.

The output current is directly related to the input phase. The adjustable level of current output is read on the digital meters. Maximum continuous output current is 6A, up to 15A for max 5 minutes. Current levels must not exceed 15A for more than 15 seconds.

The current output is isolated from the mains supply, and can be grounded or connected to any system voltage up to 690VAC.